ServicesEntry Doors
Entry Door Replacement in West Tawakoni
If your front door sticks, leaks air or just looks tired, we replace it with a new door that fits its frame, seals tight and locks without a shove. The same small crew measures your opening, answers your questions and does the install.

A front door that closes the way it should
Your entry door takes more wear than any other opening in your home. It gets slammed and leaned on, and it takes full sun for years. Over time the slab warps, the frame drifts out of square, and the weatherstripping flattens until you can see daylight around the edges.
We replace the door as a complete prehung unit in most homes, meaning a new slab, frame, sill and seals all built to work together. That gives you a door that swings evenly and closes against fresh weatherstripping on every side. When a frame is still solid and only the look needs updating, we will tell you that too.
We are a small team, and the person who visits for your consultation is part of the crew that comes back on install day. You will not be explaining your door to a new face halfway through.
What your entry door replacement includes
Measuring the rough opening
We measure the opening behind the trim, not just the old door, and check it for square and plumb. That is how we catch a sagging header or an out-of-level floor before the new unit is ordered.
Door material that suits your home
Fiberglass holds up well to heat and humidity and will not rot or dent easily. Steel is strong and budget-friendly but can dent. Wood looks warm and classic but needs its finish kept up. We walk you through each one honestly.
Sill pan and flashing
Water usually gets into a doorway at the bottom corners. We set the new sill over a pan and flash the sides so rain that blows in drains back out instead of soaking the subfloor.
Insulation and weatherstripping
The space around the new frame gets a gentle, low-pressure foam that seals air leaks without pushing the jambs out of line. Then we tune the threshold and seals so the door shuts snug and still swings freely.
Hardware and lock setup
We install your handleset and deadbolt and set the strike so the bolt slides in cleanly. If you use a smart lock, we make sure the new door is prepped to accept it.
Trim and cleanup
New interior and exterior trim is fitted and caulked, and we haul away the old door and every scrap of packaging.

Signs it is time for a new entry door
- You feel a draft standing near it
- If the air by your front door feels hotter in summer or colder in winter than the rest of the room, the seals or the slab itself have stopped doing their job.
- The door sticks or will not latch
- A door that needs a shoulder to close, or a deadbolt you have to lift the handle to throw, usually means the frame has shifted. North Texas clay soil moves with wet and dry spells, and doorways show it first.
- Soft wood or water stains at the bottom
- Swollen jambs, peeling finish at the base or a stained floor inside the threshold point to water getting in. That is worth catching before it reaches the subfloor.
- Light showing around the edges
- Close the door on a bright afternoon and look. Any light you see is a gap where air, dust and insects can come through.
- Fading, cracking or dents
- Sun-baked finishes, split panels and dented steel make your home look older than it is, and a cracked slab no longer insulates well.
How install day goes
- 1
Free in-person consultation
We visit, look at your doorway, talk through styles, glass and colors, and measure. You get a clear written quote before anything is ordered.
- 2
Ordering your door
Once you choose, we order a unit built to your measurements. We let you know when it arrives and set an install day that works for you.
- 3
Out with the old
On the day, we lay drop cloths along your entry, remove the trim and old unit, and inspect the opening. If we find damaged framing underneath, we show you before going further.
- 4
Setting and sealing the new door
We set the sill pan, place the new unit, shim it plumb, foam and flash it, then fit the hardware. Most single doors are in and locking the same day, so your home is secure by evening.
- 5
Final check together
Before we leave, you try the door yourself, lock and all, while we point out the adjustment screws on the threshold for later. The entry is swept and left clean.
What sets the price of a new entry door
No two doorways are quite the same, so we give you a price only after seeing yours. Your written quote breaks the job into separate parts, so you can see what you are paying for. $0 Down on the whole project and 0% Financing options are there if you want them.
- Material and look of the door
- Fiberglass, steel and wood each come at a different price, and decorative panels or a wood-grain finish raise it.
- Glass, sidelights and transoms
- Decorative or privacy glass, sidelights and a transom over the door change how big the unit is and what it costs.
- Changing the opening size
- Replacing a standard single door is the most straightforward job. A wider opening, a double door or added sidelights all call for reframing.
- State of the framing around the door
- Years of leaks around an old door can rot the studs or subfloor beside it. We tear out and rebuild any soft or damaged wood first so the new door rests on solid framing.
- Hardware and finish choices
- The handleset you pick, any prep for a smart lock, and whether the door arrives prefinished or is painted or stained on site all affect the cost.
Common entry door questions
- How long will my doorway be open?
- Typically just a few hours. Your old door stays up until the new one arrives and we have checked it over. With most single doors, you can lock up with the new door that evening.
- Should I pick fiberglass or steel?
- For a door that takes strong afternoon sun, we usually suggest fiberglass because it stands up to heat, moisture and dents. On a shaded or covered entry, steel is sturdy and costs less. We check which way your door faces and give you our honest pick.
- Can you widen my doorway or add sidelights?
- In many homes, yes. It comes down to what is inside the wall next to the opening. We look at that during the consultation and explain any added framing before you make a choice.
- Can I keep my current lock or smart lock?
- Most new doors are drilled for standard locksets, so plenty of locks move over without trouble. Tell us what you use now at the consultation and we will have the door prepped to fit it.
- Is there a way to spread out the cost?
- Yes. $0 Down on the whole project and 0% Financing options are available, and we explain how each works at your consultation.
- Is a storm door worth adding?
- That comes down to the door and how much weather hits it. A storm door lets air in and shields the finish on a wood door. We can go over it during the visit, and our Storm Doors page has more detail.

Let's look at your front door together
We will come out, measure your opening and talk through your options in person. The same crew you meet is the one that installs your door.